FREE SHIPPING

The Powermatic WP2510 Planer has a solid steel helical cutterhead with four-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting up table heights is quick and easy. The frame is machined from heavy cast iron and has extra wide side panels that offer rigid bed support and ensure accurate alignment. The planer's segmented, serrated infeed roll with segmented chip breakers has an independent yield of 1/4. Its automatically adjusting, chain drive gear box powers the 3" diameter infeed rollers, solid pressure bar and dual outfeed rollers for precise feeding of stock. The 3-speed feed selector gives woodworkers flexibility by changing feed rates quickly and easily. The WP2510 Planer has a large 32-3/16" x 26" precision-ground table which contains two adjustable table rollers for smooth feeding of uneven stock. The planer has a Quick-Set micro-adjustable lever that easily raises and lowers the table rollers from 0 to 0.05". The hood features a built-in 5" diameter dust chute.

Features:
Solid steel helical insert head with four-sided carbide insert tooling, no adjustment required after changing knives. Reduced sound levels when running and cutting
Built with digital readout and simple PC controller making set-up quick and easy for table heights
Segmental serrated infeed roll with segmental chip breakers for planning multiple height stock. Each segment has independent yield of 1/4"
3" diameter In/Outfeed rollers are supported by four large sealed needle bearings for long life
Quick-Set micro-adjustable table rollers lever, easily raises and lowers table rollers from 0" to .05" at a touch
Frame machined from heavy cast iron and extra wide side panels with gibs offer rigid bed support and accurate alignment
Solid pressure bar has wide foot for long wear and can be adjusted on both ends for accurate alignment
Feed selector allows you to change feed rate from low to high easily
Large 32-3/16" x 26" precision-ground table contains two adjustable table rollers for smooth feeding of uneven stock
Massive gear box uses large chain drive to power the sectional serrated infeed roll and large outfeed roller for maintaining a positive feed
Gear box incorporates the automatic chain tensioners
Air-hydraulic dust hood features an excellent dust collection system with built-in 5" dust chute

Brochure
Manual

Specifications:
Maximum Cutting Width (in.) 25
Maximum Cutting Thickness (in.) 9
Full Width Cutting Depth (in): 1/8
Maximum Cutting Depth (in.) Width under 10-3/8" - 1/4
Minimum Planning length (in.) 168 Four-sided inserts
Segmented Infeed Roller Diameter (in.) 3
Steel Outfeed Roller Diameter (in.) 3
Cutterhead Speed (RPM) 5000
Cuts Per Minute 30000
Cutter head Diameter (in.) 3-3/8
Feed Rate (FPM) 30-25/20
Dust Chute Diameter (in.) 5
Table Area (DxW/in.) 32-3/16x26
Main Drive Motor 15HP, 3Ph, 230/460V
Table Hoist Motor 1/2 HP, 3Ph
Overall Dimensions (LxWxH/in.) 52 x 36 x 59
Net Weight (lbs.) 1725
Shipping Weight (lbs.) 1850