SuperBrush 24 220v 1 or 3Ph
Click To Enlarge
- Item #: 71267
- Manufacturer: Super Max Tools
SuperBrush 24, 36 & the NEW SuperBrush 49
SuperBrush Applications include but are not limited to: white wood sanding, de-nibbing, sealer sanding, primer sanding, UV roughing, metal graining/straight lining, metal de-burring, sanding/polishing solid surface material, scuff sanding, shutter sanding, de-glossing and de-stressing.
Tension Rollers, 1-1/2" diameter, rubber covered, infeed and outfeed rollers, fully adjustable
Conveyor, reinforced steel conveyor bed with a poly conveyor belt
Sample testing available
Continuous-duty 5 HP motor, 208- 230 Volt power, single or 3 Phase
Bristle contact gauge (depth gauge) included
RPM Gauge displays brush speed, variable, 400 1200 RPM
Wire, Nylon, Abrasive are just some of the brushes available
Cast stand, zinc-plated steel bed, centerless ground column tubes
Minimum of 600, 1200, or 1800 CFM dust collection recommended
Ball bearings are sealed and permanently lubricated
Electric height adjustment, high speed and adjustable speed (49 Brush Only)
Accessories
98-0130 Casters (set of 4)
98-2501 25" Infeed / Outfeed tables
98-3701 37" Infeed / Outfeed tables
98-0118 ProScale" DRO (Digital Depth Gauge)
98-0025 Lowrider Legs with 4 casters. Lowers machine 5 1/2"
Available Brushes
Carbon Steel - Open and dense wound wire
Spring Steel - Fineset wire
Nylon / Silicon Carbide (Typrical Grit - 80, 120, 240)
Fladder Style - Specify Grit (60 - 400)
Additional Brushes Available
*Sample Testing Encouraged
Brochure
Manual
Cabinetmaker Article
Sanding Capacity
Maximum Width (in) 24, 36, or 49
Minimum Length (in) 10
Maximum Thickness (in 11 (varies with brush style)
Minimum Thickness (in) 1/32
Dimensions (HxWxD/in) SuperBrush 24 52x46x35
SuperBrush 36 52x58x35
SuperBrush 49 50x71x31
Brush (in) 9-11 diameter typical; typical bristle length 1 1/2 to 3"
Brush Speed Infinitely variable 400-1200 RPM
Dust Hood SuperBrush 24 Hinged back steel with 4" vacuum port
SuperBrush 36 Hinged back steel with 2-4" vacuum ports
SuperBrush 49 Hinged back steel with 3-4" vacuum ports
Height Adjustment (in) 3/32 per turn, DepthGauge included
Conveyor Motor 100 in-lb torque, direct drive D.C. motor
Infinitely variable 0-15 feet per minute
Drive Motor (TEFC) 5 HP, 1740 RPM; 208-230V, 60HZ continuous duty
Power Requirements: 1 Ph, 30 amp service 3 Ph, 20 amp service
Shipping Weights (lbs) SuperBrush 24 525
SuperBrush 36 605
SuperBrush 49 775
SuperBrush Applications include but are not limited to: white wood sanding, de-nibbing, sealer sanding, primer sanding, UV roughing, metal graining/straight lining, metal de-burring, sanding/polishing solid surface material, scuff sanding, shutter sanding, de-glossing and de-stressing.
Tension Rollers, 1-1/2" diameter, rubber covered, infeed and outfeed rollers, fully adjustable
Conveyor, reinforced steel conveyor bed with a poly conveyor belt
Sample testing available
Continuous-duty 5 HP motor, 208- 230 Volt power, single or 3 Phase
Bristle contact gauge (depth gauge) included
RPM Gauge displays brush speed, variable, 400 1200 RPM
Wire, Nylon, Abrasive are just some of the brushes available
Cast stand, zinc-plated steel bed, centerless ground column tubes
Minimum of 600, 1200, or 1800 CFM dust collection recommended
Ball bearings are sealed and permanently lubricated
Electric height adjustment, high speed and adjustable speed (49 Brush Only)
Accessories
98-0130 Casters (set of 4)
98-2501 25" Infeed / Outfeed tables
98-3701 37" Infeed / Outfeed tables
98-0118 ProScale" DRO (Digital Depth Gauge)
98-0025 Lowrider Legs with 4 casters. Lowers machine 5 1/2"
Available Brushes
Carbon Steel - Open and dense wound wire
Spring Steel - Fineset wire
Nylon / Silicon Carbide (Typrical Grit - 80, 120, 240)
Fladder Style - Specify Grit (60 - 400)
Additional Brushes Available
*Sample Testing Encouraged
Brochure
Manual
Cabinetmaker Article
Sanding Capacity
Maximum Width (in) 24, 36, or 49
Minimum Length (in) 10
Maximum Thickness (in 11 (varies with brush style)
Minimum Thickness (in) 1/32
Dimensions (HxWxD/in) SuperBrush 24 52x46x35
SuperBrush 36 52x58x35
SuperBrush 49 50x71x31
Brush (in) 9-11 diameter typical; typical bristle length 1 1/2 to 3"
Brush Speed Infinitely variable 400-1200 RPM
Dust Hood SuperBrush 24 Hinged back steel with 4" vacuum port
SuperBrush 36 Hinged back steel with 2-4" vacuum ports
SuperBrush 49 Hinged back steel with 3-4" vacuum ports
Height Adjustment (in) 3/32 per turn, DepthGauge included
Conveyor Motor 100 in-lb torque, direct drive D.C. motor
Infinitely variable 0-15 feet per minute
Drive Motor (TEFC) 5 HP, 1740 RPM; 208-230V, 60HZ continuous duty
Power Requirements: 1 Ph, 30 amp service 3 Ph, 20 amp service
Shipping Weights (lbs) SuperBrush 24 525
SuperBrush 36 605
SuperBrush 49 775
