Continuous-duty 1-1/2HP motor, 110-120 Volt power
25 width capacity allows wide sanding in a single pass
Sand stock as short as 2-1/4, as thin as 1/32 as thick as 4
Exclusive take-up fastener makes changing abrasive quick and easy and keeps the abrasive tight on the sanding drum
Height adjustment handle makes both radical height changes and minute adjustments for extremely precise sanding thickness control. 3/32 per turn height adjustment
Precisely dimension stock within .010 across width of sander
Roller height and downward pressure are adjustable, eliminating snipe.
Precision-flattened steel conveyor bed reinforced with four steel cross sections for no flex in conveyor
Infinitely variable feed rate, from 0 - 10 feet per minute
Cast stand, zinc-plated steel bed, centerless ground column tubes. Depth gauge with locking stop included
Minimum of 600 CFM dust collection recommended
Shipped assembled, some minimal assembly required
Drum ball bearings are sealed and permanently lubricated
110 Volt Model
725002 ShopPro 25, 20 amp service required

Brochure
Manual
American Woodworker Article - Drum Sanding Tips

Optional Accessories:
59120 Abrasive Cleaning Stick
98-0130 Casters (Set of 4)
98-2201 Infeed / Outfeed Tables
61-1002 Poly Conveyor Belt
98-0118 ProScale" DRO (Digital Depth Gauge)
98-0070 Rack-N-Roll (Abrasive Storage Shelf)

Sanding Capacity:
Maximum Width (in) 25
Minimum Length (in) 2 1/4
Maximum Thickness (in) 4
Minimum Thickness (in) 1/32
Dimensions (HxWxD/in) 43x46x31
Drum: 5 x 25 extruded aluminum 1600 RPM
Dust Hood PVC hood with one 4" vacuum port hinged at back
Ball Bearings (1") 2
Conveyor Bed Precision flattened steel
Conveyor bed reinforced with 4 steel cross sections
Conveyor Motor 43 in-lb torque, direct drive
220 in-lb torque, direct drive D.C. motor, Infinitely variable 0-10 feet per minute
Drive Motor (TEFC): 1 1/2 HP, 3450 RPM 110-120V, 60HZ continuous duty
Shipping Weight (lbs) 325