1000 Series of Panel Saws feature many of the upgrades requested by our customer who's machines are in constant use.

Comes with the new sealed bearing roller system, a folding stand, wheels for the frame, a stop bar, dual rip pointers, a 3HP Porter Cable Saw Motor, and a dust brush.

Picture shows optional Mid Fence & Spring hold downs. Shipped Assembled.

Standard Equipment
Accu Glide Sealed Bearing System
3HP, 15amp, Industrial Porter Cable Motor
Dust Port Hook Up w/Hose
Blade Lock for Easy Saw Blade Changes
Carbide Tipped 18 Tooth Saw Blade
10' Steel Frame, Powder Coat Finish
Nickel Chrome 1/8" Wall 1-3/4" Steel Guide Tubes
Detachable Tool Plate
18 Injected Molded Plastic Material Rollers w/Steel Hub
Spring Loaded Saw Counter Balance
Saw Cord Holder
2 Carriage Locks
Dust Hose Channel
Folding Stand w/Wheels
Stop, Bar & Tape
Dust Port Hose
Dual Rip Gauge
Dust Brush
New Accu-Square Alignment System

Features
52", 64", 76", 88", or 100" Cross Cut
Rip Cut Either Direction
.0156" Accuracy
Can use Router in Same Carriage
Bevel Cut to 45degrees
Control or Vary Depth of Cut
2 Carriage locks ensure no play when ripping
Able to view saw blade and mark on material
The most Material Support Rollers in its class
Simple Squaring Adjustment, Lock in Place
Uses Standard 7-1/4" Blade
1-3/4" Depth of Cut
Easily Change Saw Blades or Saw if needed

Options
Spring Hold Down
Mid Fence
Knife Cutter
Dust Upgrade
60T Aluminum or Plastic C.T. Saw Blade
Floating Router Insert Plate
Spinning Carriage Insert