FREE SHIPPING

This is a production class Dual Drum Sander that is loaded with features. A 7.5HP or 10HP motor drives the dual steel drums, which have a hard durometer rubber coating to ensure a flat, mar free finish. Independently adjustable rear drum makes fine tuning easy. A heavy cast iron table incorporates four solid jackscrews with chain drive timing to keep it level at all times. The heavy-duty poly conveyor belt provides a positive grip on the stock. The 1/4HP feed motor is coupled to a two-speed forward/reverse gearbox that will sand 8 and 12 surface feet per minute. The heavy steel cabinet provides vibration free sanding, with plenty of storage space underneath.

Features:
7.5HP, 1Ph or 10HP, 3Ph motor for plenty of power
Independently adjustable rear drum for fine tuning
Hard durometer rubber coating on steel drums provides flat, smooth finish
Two-speed gearbox for wide range of sanding projects
Full size cast iron table for solid support
Forward/reverse poly conveyor belt grips stock evenly
Dual dust ports with directional baffles for more efficient dust removal

Standard Equipment:
Two speed gearbox
Dual 4" dust ports
Sandpaper installed on drums
Tool kit

Specifications:
Conveyor Motor (HP) 1/4HP
Drum Diameter (in.) 6
Drum Length (in.) 37
Drum Speed (RPM) 1700
Dual Dust Port Diameter (OD/in.) two @ 4"
Dust Collection Minimum CFM Required 1200
Height 45 inch
Length 60 inch
Maximum Board Thickness (in.) 5-1/4
Maximum Board Width (in.) 37
Minimum Board Length (in.) 9
Minimum Board Thickness (in.) 1/32
Net Weight 962 pound
Overall Dimensions 60 x 45 x 45
Sanding Drums (number of drums) 2
Ship Weight 1142 pound