FREE SHIPPING

This 1300-pound heavy duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives, and has a 5" dust port for easy attachment to any dust collection system. The cutterhead is a helical design with 150 four sided knife inserts these produce a superior finish and much quieter operation compared to conventional cutterheads, and the inserts are installed without further adjustments. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. Infeed and outfeed rollers are fitted with roller bearings for long life. The sectional infeed roller and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed rollers facilitate both rough and finish planing. The solid steel outfeed roller is machined with small serrations to insure a smooth finish yet provide positive feeding. The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work. The massive, ribbed cast iron table is ground finished and rises smoothly via the hand wheel. With a hefty 7-1 /2 horsepower motor, the 201HH Planer is perfect for the small to medium shop with continuous planing requirements.

Helical cutterhead with knife inserts provides smoother, quieter cutting and finer finish than conventional systems
Cast iron 1300 lb. construction for solid performance without vibration
2 feed speeds - 20/30 fpm - accommodates rough and fine finish work
Segmented infeed roller with sectional chipbreaker allows multiple board planing
Roller bearing-mounted feed rollers for long life
Adjustable bed rollers allow smooth feeding of rough or finished workpieces
Oversized cast iron table travels on 2 large lead screws for heavy duty support
Dust chute with 5" port for dust collection
Standard Equipment:
Dust collection port
Adjustable foot pads
Tool kit

Brochure
Manual

Specifications:
Bed Rollers Adjustable from Front 2
Column Diameter (in.) 2-1/2
Cutterhead Diameter (in.) 3-1/4
Cutterhead Speed (RPM) 4800
Dust Collection Minimum CFM Required 900
Dust Port Diameter (OD/in.) 5
Feed Rate (FPM) 20 and 30
Height 59 inch
Infeed Roller Diameter (in) 3
Length 42 inch
Maximum Depth of Cut (in.) 3/16
Maximum Height of Rollers Parallel to Tabletop (in.) table rollers - 0.05
Maximum Planing Thickness (in.) 9-1/4
Maximum Planing Width (in.) 22
Minimum Planing Length (in.) 10
Net Weight 1350 pound
Number of Knives 150 four-sided inserts
Number of Speeds two
Outfeed Roller Diameter (in) 3
Overall Dimensions 42 x 49 x 59
Readout Scale mm/in
Segmented Infeed Roller Diameter (in.) 3
Ship Weight 1430 pound
Table Height Adjust Manual 1 Turn = 1/16
Table Size (in.) 32-1/4 x 24
Table Support 2-column