FREE SHIPPING

This 1,300 lb. heavy-duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives. The hood comes standard with a 5" dust port for easy attachment to any dust collection system. The cutterhead is complete with four high speed steel knives and turns at 4,800 rpm producing 19,200 cuts per minute. The anti-kick back fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish.
The well designed infeed and outfeed rollers are fitted with roller bearings for long roller life. The sectional infeed and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed roller facilitates both rough and finish planing. The solid steel outfeed roller is machined with small serrations to insure a smooth finish yet provide positive feeding.
The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work. You may easily raise the massive ribbed cast iron, ground finished table 1 /16" with each turn of the hand wheel.
The model 201 is available with 7-1 /2 horsepower, 3-phase 230 or 460 volt or 7-1 /2 horsepower, single-phase motors. This planer is perfect for the small to medium shop with continuous planing requirements.

Brochure
Manual

Specifications:
Stock#1791261 (7-1/2HP, 1Ph, 230V)
Stock#1791262 (7-1/2HP, 3Ph, 230V)
Stock#1791280 (7-1/2HP, 3Ph, 460V
Working Width (mm/in) 560 / 22
Maximum Depth Cut (in) 3/16
Minimum Thickness (in) 1/8
Maximum Thickness (in) 9-1/4"
Segmented Infeed Roller Diameter (in) 3
Steel Outfeed Roller Diameter (in) 3
Feed Speeds (FPM) 20/30
Bed Rollers Adjustable from Front 2
Table Size (LxW/in) 32-1/4 x 24
Minimum Length Workpiece (in) 10
Table Height Adjust Manual 1 Turn = 1/16
Readout Scale mm/in
Cutterhead Diameter (in) 3-1 /4
Number of Knives 4
Cutterhead Speed 4800
Table Support 2-column
Dust Connect Diameter (mm/in) 125 / 5
Minimum CFM Required 900
Weight Gross/Net (lbs) 1430/1350
Tools Supplied Yes
Overall Dimensions Assembled (LxWxH/in) 39 x 49 x 53
PN Single-Phase 230V 1791261
PN Three-Phase 230V 1791262
PN Three-Phase 460V 1791280
PN Accy. Knives (4) Set 6012179
PN Accy. Bed and Feed Roller Setting Gauge 2230002