Sand Smart Control

Eliminates the guess-work of manually controlling the infinitely-variable feed speed
Simplifies the sanding operation
Provides a consistent finish even with varying grain pattern and density
Greatly increases abrasive planing and dimensioning speed
Maintains highest possible feed rate without overload
Standard on all 220 Volt Series drum sander models

25 and 27, Single and Double Drum
Continuous-duty 5HP motor, 208- 230 Volt power, single or 3 Phase
SandSmart" automatic control of the infinite-variable feed rate (0-15 ft./min.) for the conveyor gives a perfect finish
Multiple grit sanding in single pass with double drum models
Precisely dimension stock within .010 across width of sander
25 or 37 wide sanding capacity
Height of the rear drum is indepen- dently adjustable in relationship to the front drum
Optional ProScale depth gauge allows incredible accuracy
Precision-flattened steel conveyor bed reinforced with four steel cross sections for no flex
Self-cooling drum with abrasive Take- Up-Fasteners make changing abrasive quick and easy plus keeping abra- sives tight
Sand as thick as 12 with 37 models and 6 with 25 models Sand as thin as 1/32 and as short as 2-1/4 (single drum) 3-1/2 (double drum) models
Cast stand, zinc-plated steel bed, centerless ground column tubes
Dust Collection- mandatory for all models: 25 - 600 CFM min., 37 1200 CFM min.
Shipped assembled, some minimal assembly required
Drum ball bearings are sealed and permanently lubricated

220 Volt Models
733003 SuperMax 25 single drum, 1 Ph
733103 SuperMax 25 single drum, 3 Ph
713003 SuperMax 25x2 dual drum, 1 Ph
713103 SuperMax 25x2 dual drum, 3 Ph
736003 SuperMax 37 single drum, 1 Ph
736103 SuperMax 37 single drum, 3 Ph
737003 SuperMax 37x2 dual drum, 1 Ph
737103 SuperMax 37x2 dual drum, 3 Ph

Optional Accessories
59120 Abrasive Cleaning Stick
98-0130 Casters* (Set of 4) *Included with 37" models
98-2501 25" Infeed/Outfeed Tables
98-3701 37" Infeed/Outfeed Tables
61-1004 25" Poly Conveyor Belt
61-1007 37" Poly Conveyor Belt
98-0118 ProScale" DRO (Digital Depth Gauge)
98-0070 Rack-N-Roll (Abrasive Storage Shelf)
72-1321 Magnetic Starter - 1 phase
72-1311 Magnetic Starter - 3 phase

Brochure
Manual
American Woodworker Article - Drum Sanding Tips

Sanding Capacity
Maximum Width (in) 25 or 37
Minimum Length (in) 2 1/4 single drum or 3 1/2 double drum
Maximum Thickness (in 6-25" model or 12-37" model
Minimum Thickness (in) 1/32
Dimensions (HxWxD/in) Model 25 & 25x2 43x46x31
Model 37x2 43x58x31
Drum(s): Extruded Aluminum 25" Model 1or 2 5 x 25
25" Model 1 5 5 x 37
Drum Speed 1600 RPM
Dust Hood 25" Model Hinged back steel with one 4" vacuum port
37" Model Hinged back steel with 2-4" vacuum ports
Height Adjustment (in) 3/32 per turn, DepthGauge with locking stop
Ball Bearings (1") 2 per drum (2 or 4)
Conveyor Motor SandSmart" controlled
100 in-lb torque, direct drive D.C. motor, Infinitely variable 0-15 feet per minute
Drive Motor (TEFC): 5 HP, 1740 RPM 208-230V, 60HZ continuous duty
Power Requirements 1Ph, 30amp service or 3Ph, 20 amp service
Shipping Weight (lbs) 25" Model 405
25" x 2 Model 435
37" Model 450
37" x 2 Model 485